Portable Power Station for Wholesale and Distribution
Our portable power station range includes two documented battery capacity options: 1.004kWh and 2.009kWh, both with a rated AC output of 500W. Using LiFePO4 battery technology, these configurations have a published cycle life of 8,000+ cycles at 80% DOD. The two capacity options provide different battery storage capacities while retaining the same stated rated AC output.
-
![Portable Solar Charging Station]()
Portable Solar Charging StationPortable solar charging station | 1KWh-2KWh Off-Grid Hubread more
If you think a power bank is enough for a week in the wild, you're in for a dark surprise. Our portable solar charging station is... -
![Lifepo4 Portable Power Station]()
Lifepo4 Portable Power StationLifepo4 portable power station | Extreme Longevity Power Boxread more
Most portable units on the market use "disposable" lithium-ion batteries that die after a few hundred charges. Our lifepo4... -
![Portable Power Station with Solar Panel]()
Portable Power Station with Solar PanelPortable power station with solar panel | Complete Green Energy Kitread more
Why buy a battery and then struggle to find compatible panels? Our portable power station with solar panel bundle gives... -
![Portable Power for Camping]()
Portable Power for CampingPortable power for camping | Ultra-Light 1000Wh Explorer Unitread more
Nobody wants to drag a 40-pound block of lead to their favorite campsite. Our portable power for camping is designed for the... -
![Portable Power Station with ac Outlet]()
Portable Power Station with ac OutletPortable power station with ac outlet | Pure Sine Wave Mobile Hubread more
Standard power banks are fine for phones, but try plugging in a CPAP machine or a high-end laptop, and you'll see the... -
![Portable Power Station for Home]()
Portable Power Station for HomePortable power station for home | Indoor-Safe Emergency Backupread more
Gas generators are loud, smelly, and dangerous to run indoors. Our portable power station for home is the clean, silent... -
![Portable Power Storage]()
Portable Power StoragePortable power storage | Rugged 2000Wh Energy Reservoirread more
When your project takes you away from the grid, you need portable power storage that can survive a few knocks and still deliver. This...
Portable Power Station Specifications
Our portable power stations for wholesale and distribution include two documented capacity configurations.
| Specification | 1000Wh Configuration | 2000Wh Configuration |
|---|---|---|
| Nominal capacity | 1000Wh | 2000Wh |
| Rated battery capacity | 1.004kWh | 2.009kWh |
| Rated AC output | 500W | 500W |
| Battery chemistry | LiFePO4 | LiFePO4 |
| Cycle life | 8,000+ cycles | 8,000+ cycles |
| Cycle life test condition | 80% DOD | 80% DOD |
| AC input voltage | 230V AC | 230V AC |
| Maximum solar input | 300W | 300W |
| Solar charging controller | MPPT | MPPT |
| AC output waveform | Pure sine wave | Pure sine wave |
The main documented difference between these configurations is battery capacity. Both have the same published rated AC output, maximum solar input and AC input voltage.
Battery Technology and Product Documentation
Our portable power stations use lithium iron phosphate (LiFePO4) batteries.
The published cycle life is 8,000+ cycles at 80% depth of discharge (DOD). This condition is important when comparing cycle-life specifications across different products.
The product pages list the following documentation and compliance items:
| Item | Published product documentation |
|---|---|
| CE | Listed |
| UN38.3 | Listed |
| MSDS | Listed |
| RoHS | Listed |
Documentation should be checked against the specific model and shipment requirements when placing an order.
Solar Charging and AC Output
The published charging and output specifications include:
- AC input voltage: 230V AC
- Maximum solar input: 300W
- Solar charging controller: MPPT
- AC output waveform: Pure sine wave
- Rated AC output: 500W
These specifications describe the published AC and solar input configuration. Detailed solar voltage ranges, charging times, vehicle charging parameters and simultaneous charging conditions are not specified in the available product information.
Manufacturing and Quality Control Capabilities
Our manufacturing operations cover energy storage product assembly, production management and product testing.
Our disclosed manufacturing resources include:
- A 20,000㎡ manufacturing facility.
- More than 20 R&D personnel.
- MES-based production management and data traceability.
- Robotic equipment for battery cell assembly.
- AGV automated material handling.
- Charge and discharge testing equipment.
- Electrical performance testing equipment.
- Safety performance testing equipment.
- High- and low-temperature testing equipment.
- Air-tightness testing equipment.
Our disclosed quality control processes also include 24-hour simulated load testing. This is a company-level process disclosure, not confirmation that every portable power station unit undergoes an individual 24-hour test.
Technical Support and After-Sales Service
Our pre-sales engineering team provides product selection assistance and solution design.
Our disclosed after-sales services include installation guidance and remote video support.
Request a Portable Power Station Quotation
Send us your target battery capacity, required output power, preferred configuration, estimated order quantity or product reference images.
We can use these details to identify relevant portable power station options and prepare a quotation for your review.
As one of the most professional portable power station manufacturers and suppliers in China, our products have good reputation in the market. Please erst assured to wholesale custom made portable power station from our factory. If you have any enquiry about cooperation, please feel free to email us.
1000w portable power station, lifepo4 power station, Portable Power For Camping